PGA Processor
- The pin grid array or PGA is a type of packaging used for integrated circuits, particularly microprocessors.
On a PGA, the integrated circuit (IC) is mounted in a ceramic slab of which one face is covered, or partially covered, in a square array of metal pins. The pins can then be inserted into the holes in a printed circuit board and soldered in place. They are almost always spaced 2.54 mm (a tenth of an inch) apart. For a given number of pins, this type of package occupies less space than older types such as the dual in-line package (DIP).
On a PGA, the integrated circuit (IC) is mounted in a ceramic slab of which one face is covered, or partially covered, in a square array of metal pins. The pins can then be inserted into the holes in a printed circuit board and soldered in place. They are almost always spaced 2.54 mm (a tenth of an inch) apart. For a given number of pins, this type of package occupies less space than older types such as the dual in-line package (DIP).
Examples of FC-PGA2 Package Type Processors:
- Pentium 4 processor
- Pentium III processor
- Intel Celeron processor
LGA Processor
- Short for Land Grid Array, LGA is the interface used to connect Intel Pentium 4 processors and AMD Opteron to the computer motherboard.
The LGA is a type of surface-mount packaging used for integrated circuits. It can be electrically connected to a PCB either by the use of a socket or by soldering directly to the PCB.
The LGA is used as a physical interface for microprocessors of the Intel Pentium 4 and AMD Opteron families. Unlike the pin grid array (PGA) interface found on most AMD and Intel processors, there are no pins on the chip; in place of the pins are pads of bare gold-plated copper that touch pins on the motherboard.
- Short for Land Grid Array, LGA is the interface used to connect Intel Pentium 4 processors and AMD Opteron to the computer motherboard.
The LGA is a type of surface-mount packaging used for integrated circuits. It can be electrically connected to a PCB either by the use of a socket or by soldering directly to the PCB.
The LGA is used as a physical interface for microprocessors of the Intel Pentium 4 and AMD Opteron families. Unlike the pin grid array (PGA) interface found on most AMD and Intel processors, there are no pins on the chip; in place of the pins are pads of bare gold-plated copper that touch pins on the motherboard.
Examples of LGA Processor:
Casing System
Antec "Performance One" P190 Enclosure
ATX Model
Micro ATX Model
Cooling System
Thermaltake Toughpower 1200-watt Modular PSU
Latest Buses
PCI Bus
PCI Express Bus
No comments:
Post a Comment